Inga produkter tillagda!

Lägg en produkt i varukorgen så ser det lite roligare ut här ;)

Varukorg

0 kr
banner_dynavector_xx2_ii.png
DYNAVECTOR XX2 II

DYNAVECTOR XX2 II

Centrallager (2-5 arbetsdagar för varor som finns i lager hos leverantören.)
Fri frakt!

Produktbeskrivning

Description

XX-1 was the first cartridge to feature a "magnetic flux damper" (patent) and softened magnetism" (patent) processes that reject the magnetic fluctuation that is detrimental to a moving coil cartridges performance.

The The DV XX-2 MKII retains the benefit of the flux damper but features the Alinco-5 magnet and the similar rigid construction to the Te Kaitora Rua. Alnico magnets exhibit high magnetic flux density combining with a low coercive therefore magnetic resistance is lower than other magnetic types such as rare earth and ferrite, providing the exceptional stability of the XX-2 MKII output voltage. There is also the additional advantage of low magnetic and electrical resistance contributing to a discernable improvement in sound quality.

The XX-2MKII also exhibits deep powerful bass, treble is both clear and lively possessing none of the hardness found in many moving coil designs.

The XX-2MKII also features a 6 mm solid boron cantilever fitted with a Pathfinder Line contact stylus. PCOCC (pure copper ohno continuous casting process) copper wire is used for the coil. The output voltage of 0.28mV is higher than that of the XX-2 and 6 ohms impedance are suited to most moving coil phono stages.
For ridgity of construction the XX-2 MKII cartridge body is machined from 7075 aluminium the hardest available. However, having only a total weight of only 8.9 grams it is suitable for a variety of popular tonearms.

dimensions



Specifikation

  • Type Low output moving coil cartridge with Alnico magnet and Flux damper
  • Output Voltage 0.28mV (at 1KHz, 5cm/sec.)
  • Channel Separation 30 dB (at 1KHz)
  • Channel balance 1.0 dB (at 1KHz)
  • Frequency response 20 - 20,000Hz (± 1dB)
  • Compliance 10 x 10-6 cm/dyn
  • Tracking force 1.8 - 2.2 grams
  • Impedance R=6 ohms
  • Recommended load resistance > 30 ohms
  • Cantilever 6mm length 0.3 mm dia. solid boron
  • Stylus PF Line contact shape, stylus radius: 7 x 30 micron
  • Weight 8.9 grams

Bra fraktalternativ

Kvalitetsprodukter

Säker betalning

https://cdn.klarna.com/public/images/SE/logos/v1/basic/SE_basic_logo_std_blue-black.png?width=150&eid;=54130
kortbetalning.jpg