About unnus Ventilation
With a unnu ventilation solution, you get the opportunity to dissipate heat from the items you have placed in your unnu furniture, typically behind either a wooden or fabric door.
The ventilation solution is installed under the cable hole at the top of the furniture.
With ventilation in a piece of furniture with a wooden or fabric door installed, it will at least ensure the same ventilation as furniture without a door.
Because heat rises, we have designed the ventilation solution so that it is installed just under the top panel of the furniture, thereby drawing the warm air upward and out of the furniture.
Through the cable hole at the bottom of a Unnu piece of furniture, fresh cold air enters the furniture.
Remember when ordering Unnu furniture to consider how many top holes you need. This can be decisive for which models you should order.
The ventilation is temperature-controlled, so it will not start simply when power is connected.
It starts up at around 30 degrees with 800 revolutions per minute. At around 40 degrees, it runs at 1200 revolutions per minute.
It stops automatically when the temperature drops.
When using the ventilation solution, the back panel of the furniture must be removed.
The ventilation occupies 13 cm down from the underside of the top panel and extends 15 cm into the furniture.
You can order the ventilation solution with a silver or black cover.
The ventilation solution cannot be installed in a room with drawers.
The ventilation solution cannot be installed in models 12S, 120S, 220, and 221.
The ventilation solution will not be audible from over 2 meters away.
Power cable included.The installation manual accompanies your order and can also be found under Support.
