Butiken håller stängt torsdag den 1 maj och lördag den 3 maj.
banner_dynavector_20x21.png

DYNAVECTOR 20X2

6 990 kr 10 990 kr
klarna-logo

Att låna kostar pengar!

Om du inte kan betala tillbaka skulden i tid riskerar du en betalningsanmärkning. Det kan leda till svårigheter att få hyra bostad, teckna abonnemang och få nya lån. För stöd, vänd dig till budget- och skuldrådgivningen i din kommun. Kontaktuppgifter finns på konsumentverket.se.

Lägg i varukorgen
Mer produktinformation
Begränsat antal (Skickas 1-2 dagar efter beställning)
Fri frakt!
Garanti i 24 månader

Description

For more than 35 years Dynavector have established an enviable reputation for producing affordable high quality moving coil cartridges. Notably high output models that are designed to work with MM inputs negating the necessity for equipment change or the use of setup devices required for low output cartridges. The outstanding performance of the Dynavector high output moving coil cartridges can be attributed to the exclusively Dynavector designed coil winding machine capable of utilizing extremely fine coil wire providing a high output to mass ratio.


Features and Improvements

DV-20X has a solid aluminum alloy body and a rigid magnet construction similar to XX-2MKII. The cantilever is a 6mm length of hard aluminum pipe with a Micro-Ridge stylus. The magnetic flux damping and softened magnetism along with powerful neodymium magnets gives the 20X2H a healthy 2.8 mV output - suitable for most MM inputs. The 20X2L has an output of 0.3 mV ideal for most MC phono stages.

Both high and low versions of their 20X2 are available ensure for the optimum end result. The high output model is well suited to valve preamplifiers or electronics that only offer MM inputs whilst the low output version offers superb performance when combined with dedicated moving coil inputs.


Modell
20X2
Varumärke
Jämför produkt
  • Type High/Low output moving coil cartridge with flux damper and softened magnetism
  • Output Voltage 2.8mV / 0.3mV (at 1KHz, 5cm/sec.)
  • Channel Separation 25 dB (at 1KHz)
  • Channel balance 1.0 dB (at 1KHz)
  • Frequency response 20 - 20,000Hz (± 2dB)
  • Compliance 12 x 10-6 cm/dyn
  • Tracking force 1.8 - 2.2grams
  • DC resistance 150 ohms / 5 ohms
  • Recommended load
  • resistance > 1,000 ohms / > 30 ohms
  • Cantilever 6mm length, hard aluminium pipe
  • Stylus Micro Ridge Nude diamond
  • Weight 9.2 grams
Modell
20X2
Varumärke
Jämför produkt